ABB RELION 615 series Installation Manual page 39

1MAC051065-MB K
615 series ANSI
Installation Manual
• Wall mounting frame and rail parts
• Back plate
• Screws
• Dimensions for screw holes
1. Drill screw holes according to the dimensional drawing.
2. Mount the wall mounting frame and the rails.
3. Install the back plate.
4. Loosen the four M5 fixing screws in the case to fit the case into the mounting frame.
5. Mount the case between the rails.
A070593 V4 EN
Figure 18: Wall mounting the protection relay
A 16.93 inches (430 mm)
6. Tighten the screws.
Section 4
Mounting
A
31