Connecting Binary Signals - ABB RELION 615 series Installation Manual

1MAC051065-MB K
5.5
615 series ANSI
Installation Manual
GUID-C323C8A4-E434-4DCA-8DA8-C0ED44BC693D V1 EN
Figure 40: Connection of drain wires
1 Drain wires

Connecting binary signals

• Connect the wires for the binary signals to the correct device according to the
connection diagram. Each terminal for binary input and output signal is dimensioned
for one 14 or 16 Gauge wire.
In addition to specific BIO cards, BI/O signals are available with
some AIM and PSM cards. See the application manual for standard-
configuration specific binary signal options.
See the specific card variant from the application manual.
Section 5
Connecting
1
53