Securing Handle - ABB RELION 615 series Installation Manual

1MAC051065-MB K
4.2.4
615 series ANSI
Installation Manual
1. Open the sealing screw about nine turns.
2. Thread a sealing wire through the holes in the sealing screw and the handle.
GUID-10D2039E-4C58-4372-B0B2-EDFF0C2A451C V2 EN
Figure 6: Sealing screw
1 Sealing screw
2 Sealing wire and seal

Securing handle

The front panel of the protection relay has an integrated sealing screw. By default, the
screw is screwed all the way in and not used when installing or detaching the plug-in unit.
Instead of sealing the plug-in unit, the sealing screw and the spacer supplied with the
protection relay can be used for securing the handle in place.
1. Fully open the sealing screw and remove it.
2. Re-insert the sealing screw with the spacer.
1 2
Section 4
Mounting
17