Energizing Protection Relay - ABB RELION 615 series Installation Manual

Section 5
Connecting
5.8
58

Energizing protection relay

Before connecting the auxiliary power, check that the protective film is
removed from top of the protection relay.
• Before connecting the auxiliary power, check that the terminal strip is wired and
placed correctly.
• Remove the protective film from the top side of the unit. Check that there is no debris
visible in the ventilation holes.
GUID-97A2D4BA-29FC-4E2F-8C4D-81EE5E77CF79 V2 EN
Figure 45: Removing the protective film
During the start-up, indications and self test procedures are shown in a certain order.
1MAC051065-MB K
615 series ANSI
Installation Manual