Dimensions, Clearances; 30Xa 252-352 - Mche Heat Exchanger (Standard) And 30Xa 252-302 - Cu/Al Heat Exchanger (Option 254/255); 30Xa 402-452-504 - Mche Heat Exchanger (Standard) And 352-452 - Cu/Al Heat Exchanger (Option 254/255) - Carrier Aquaforce 30XA302 Installation, Operation And Maintenance Instructions

Air-cooled screw chillers

Hide thumbs Also See for Aquaforce 30XA302:

Table of Contents

3 - DIMENSIONS, CLEARANCES

Legend

All dimensions are given in mm.

Required clearances for maintenance (see note)

Recommended space for evaporator tube removal

Water inlet for standard unit

For options 5, 6, 100A, 100C, 107 refer to the certified drawing.

Water outlet for standard unit

For options 5, 6, 100A, 100C, 107 refer to the certified drawing.

Air outlet – do not obstruct

Power supply and control connection

Control circuit connection for option 158

NOTES:

Drawings are not contractually binding.

Before designing an installation, consult the certified

dimensional drawings, available on request.

For the positioning of the fixing points, weight

distribution and centre of gravity coordinates please

refer to the dimensional drawings.

If the installation includes several units or if this

(these) is (are) close to walls, please refer to chapters

3.12 - "Multiple chiller installation" and 3.13 -

"Distance to the wall" of this document to determine

the space required.

Table of Contents

Show Quick Links

Table of Contents