1.4.5 Description of service points
1. Safety check
Check the safety functions. It is often appropriate to do this check in conjunction with
test driving. The following items shall be checked at all machines:
• No leakage on fuel lines and connections.
• No mechanical damages to the electrical cables. All insulation intact.
• The muffler shall be undamaged and its screws tightened. No exhaust leakage in
connections.
Machines with mechanic PTO
Test Status
1
Brake pedal not pressed.
PTO not activated.
2
Brake pedal pressed.
PTO activated.
3
Engine running.
PTO activated.
4
Engine running.
Machines with electric PTO
Test Status
1
Operator not sitting in seat.
Brake pedal pressed.
PTO not activated
2
Brake pedal not pressed.
PTO not activated.
3
Brake pedal pressed.
PTO magnetic clutch activated.
4
Engine running.
PTO magnetic clutch activated.
5
Cruise control activated.
(If applicable)
6
Engine running.
WORKSHOP MANUAL
PARK
Chapter
1 - General instructions
Action
Turn the key and make a
start attempt.
Turn the key and make a
start attempt.
Operator rises from the
seat.
Disconnect cable from the
shut off valve.
Action
Turn the key and make a
start attempt.
Turn the key and make a
start attempt.
Turn the key and make a
start attempt.
Operator rises from the
seat.
Operator rises from the
seat.
Disconnect cable from the
shut off valve.
EDITION
Page
10
2018
Result
Engine shall
not start.
Engine shall
not start.
Engine shall
stop.
Engine shall
stop after a few
minutes.
Result
Engine shall
not start.
Engine shall
not start.
Engine shall
not start.
PTO magnetic
clutch shall
disengage.
Cruise control
shall
disengage
Engine shall
stop after a few
minutes.