Can_Reset - ICP DAS USA mPAC-7186EXD-CAN User Manual

3.1.1 CAN_Reset


Description:
Reset the CAN controller by hardware circuit. After running this function,
the CAN controller will be set to initial state. For more information about
this, please refer to the SJA1000 data sheet on the web site.
http://www.semiconductors.philips.com/pip/SJA1000.html#datasheet

Syntax:
void CAN_Reset(void)

Parameter:
None

Return:
None

Relative function:
None
I-7188XBD-CAN/μPAC-7186EXD-CAN user manual (ver.1.0.3, May/09/2014) 21