Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
CAN-8124/CAN-8224/CAN-8424
1. Introduction
This manual introduces the user to the methods used to implement
the CAN-8x24 devices into their applications in a quick and easy way.
This will provide users with only basic instructions. For more detailed
information, please refer to the user manual located on the ICPDAS CD-
ROM or download it from the ICPDAS web site:
http://www.icpdas.com/download/download-list.htm
The goal for this manual is focused on helping users to quickly
familiarize themselves with the CAN-8x24 devices. Users can apply the
CAN-8x24 devices as follows.
● Complies with DeviceNet specification
Volume I, Release 2.0& Volume II,
Release 2.0
● Group 2 Only Slave; (non UCMM-
capable)
● Supports Predefined Master/slave
Connection Set
● Supports Fragmented Explicit Message
CAN-8124/CAN-8224/CAN-8424 Quick Start User Guide (Version .2.0, Aug/2007) ------ 1
Quick Start User Guide
Features
● Dynamic Assembly Objects Mapping
● I/O operating modes: Polling, Bit-
Strobe, Change of State/Cyclic
● Supports Device Heartbeat message
● Supports Device Shutdown message
● EDS file dynamically
● Data rate and Node Address (MAC ID)
configured via rotary switch
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ICP DAS USA CAN-8224
Summary of Contents for ICP DAS USA CAN-8224
- Page 1 ● Supports Device Shutdown message capable) ● EDS file dynamically ● Supports Predefined Master/slave ● Data rate and Node Address (MAC ID) Connection Set ● Supports Fragmented Explicit Message configured via rotary switch CAN-8124/CAN-8224/CAN-8424 Quick Start User Guide (Version .2.0, Aug/2007) ------ 1...
- Page 2 2.Hardware structure 8KDNSx Hardware Structure CAN-8224 CAN-8124 8x20 Hardware Structure CAN-8424 CAN-8124/CAN-8224/CAN-8424 Quick Start User Guide (Version .2.0, Aug/2007) ------ 2...
- Page 3 Note: If users set the illegal values of the rotary switch, the MOD led will flash when the system is powered up. If this condition occurs, users must configure the legal values of the switches and reset the device, and then the device should work normally. CAN-8124/CAN-8224/CAN-8424 Quick Start User Guide (Version .2.0, Aug/2007) ------ 3...
- Page 4 Init solid Link failed on the link; for example, detected a duplicate node address network configuration error Solid On line, communicating DeviceNet is on communication CAN-8124/CAN-8224/CAN-8424 Quick Start User Guide (Version .2.0, Aug/2007) ------ 4...
- Page 5 3. Produce the corresponding EDS file. CAN-8124/CAN-8224 just only supports off-line mode. After configuring the CAN-8x24 and creating the specific EDS files, apply the EDS file to your DeviceNet application. CAN-8124/CAN-8224/CAN-8424 Quick Start User Guide (Version .2.0, Aug/2007) ------ 5...
- Page 6 Note: In the on-line mode, users can define the needed assembly instance or default assembly instance, and set the IO connection path. But in off-line mode, we provide the default assembly instance for the CAN-8124/CAN-8224. The IO connection path must be set via an explicit connection.
- Page 7 Data Length(Byte) Component modules ID(Hex) 0x64 DO: 2 I-8053 (ch0~ch15) 0x65 AO: 8 I-8024 (ch0~ch3) 0x66 DI: 2 I-8057 (ch0~ch15) 0x67 AI: 8 I-87017 (ch0~ch3) 0x68 AI: 8 I-87017 (ch4~ch7) CAN-8124/CAN-8224/CAN-8424 Quick Start User Guide (Version .2.0, Aug/2007) ------ 7...
- Page 8 3. There are two ways to access IO modules. The first method is by way of the IO connection object. The other is by using an explicit message to set/get the IO attribute for the application object. 4. Release the use of the Predefined Master/Slave Connection Set. CAN-8124/CAN-8224/CAN-8424 Quick Start User Guide (Version .2.0, Aug/2007) ------ 8...
Need help?
Do you have a question about the CAN-8224 and is the answer not in the manual?
Questions and answers