Showven SPARKULAR miniFALL BT14 User Manual page 6

Options
Set Temperature
Auto Heat
Density
Mode Selection
DMX Channel
Mode
Default Parameter
Standby Switch
Cable DMX mode：
When using the DMX controller, the system takes 2 channels
The First channel
The second channel
240-255
Please don't set the same DMX address when controlling with host controller ZK6200/ZK6300.
Host controller can reduce the performance risk by monitor the working status of each machine.
Range
Setup inner Core temperature. Please don't change default
500-620
value without engineer's suggestion from SHOWVEN.
Auto preheat function switch after turning on
ON/OFF
machine
Adjust the sparks density. Please don't change default
70-100
value without engineer's suggestion from SHOWVEN.
Factory Mode/ Factory Mode is factory debugging mode, User
User Mode Mode is using mode
2 DMX Channel/ 2 DMX Channel is standard mode, 4 DMX Channel
4 DMX Channel is speical mode.
Press "ENTER" to restore all parameters to the
factory settings.
When it's on, the machine can only generate spark
On/Off
when pre-heating finish.
0-15
16-255
60-80
20-40
0-10
Page-5/6
Explanation
Functions
Fountain OFF
Fountain ON
Functions
Clear Material
Emergency Stop
Pre-heat OFF（Disable in Auto-heat）
Pre-heat ON（Disable in Auto-heat）