Table of Contents
Advertisement
ADASH
ADS
The Adash Deflection Shapes modul enables to measure operating deflection shapes of the machine.
ADS project
The project must be created on the computer. The ADS software enables to create the geometry of the machine
(points, lines and directions).
Project Import to VA5
Copy the project file (ads extension) to VA5_DISC (to the root or VA4ads folder). The project will be moved to
the VA5 memory after entering the ADS module. The file on the VA5_DISC will be deleted.
Rewriting of geometry
Usually the user creates the simple geometry firstly and takes the measurements. After that first test he
changes the geometry (adds next points, lines and directions). When the project is imported to the instrument
again then only the geometry file will be rewritten. The already taken data will not be deleted.
Project List
The project list opens after entering the module.
Project Menu
Press the Project button to open a menu. A Create item misses here. You can create an ADS project only by
importing geometry from computer (see above).
For further technical and contact information visit
135
www.adash.com
or email: info@adash.com
Adash 4500 – VA5Pro
Advertisement
Table of Contents
