Balancing Menu; Load Project Item; Ampl. & Phase Measur. Item; Balancing Item - Adash 4300 - VA3 User Manual

Vibration analyser

Hide thumbs Also See for 4300 - VA3:

Table of Contents

Adash Ltd.

A4300 - VA3 - Balancing

Balancing Menu

Select the Balancing item from instrument main menu. Then the Main menu of balancing appears.

- by using up/down arrows select required item and then press right arrow, ENTER or START

- by using left arrow or ESC return to main menu.

A project is loaded from the data instrument memory (12MB) to the balancing instrument memory.

Select required project name and confirm by ENTER.

Ampl. & Phase measur. Item

It enables on-line measurement of amplitude, phase and machine speed. Description of these items –

see [1], chapter Analyser Menu / Ampl. & phase measur. Item. These measurements can be made

before creation of a new project and before balancing procedure – see chapters New project Item,

Balancing Item

This is the main balancing process.

Before creation of a new balancing process or when you continue with process it is sensible to check

whether the amplitude and phase is equal with initial condition.

- by right arrow, ENTER or START button the first measurement screen occurs. Screen is empty for

new project without measurements.

- by using PdDn and PgUp you can display next or previous measurement screens.

- every measurement starts by START button.

Adash Ltd., Czech Republic, Tel.: +420 59 6232670, Fax: +420 59 6232671, e-mail: info@adash.cz

For further technical and contact information consult www.adash.net, www.adash.cz

Table of Contents