ADASH
Adash 4500 – VA5Pro
Recorder
Many of older engineers remember the past time, when the signal was recorded to the tape-recorder and
consequently analyzed in Analyzer. Such approach had one important benefit. You can analyze the signal again
and again. When you need to make all required analysis in real-time, you are under time pressure. If additionally
the for example runup can be run only once, the pressure is extreme. The tape-recorder was the solution. It was
simple unit with simple operation, no danger to loose the data.
The same solution offers the VA5 Recorder. It enables to record simultaneously all 4 AC channels, tacho
channel and 4 DC process values channels into the memory. The sampling frequency is from 64Hz to 196kHz.
The maximum record length depends of free memory size.
Project List
The list of saved records opens when you enter the Recorder module. The list is empty if you have no saved
records yet. The recording date and time is displayed in the status bar in the bottom right corner.
Project Menu
Use the Project button to manage the records in the list.
97
For further technical and contact information visit
www.adash.com
or email: info@adash.com