3-point linkage frame (1) enables attachment of the mower to tractor's 3-point linkage. Drive
from tractor's rpm is transmitted through
cutterbar, there are disco with two knives each. Apart from that, drive from tractor's rpm through
(3) and PTO shaft (10) is transmitted to roller conditioner (8). Hydraulic
Intersecting axis gear
cylinder (2) is used to adjust the mower to working position. It is supplied from outer hydraulics of
the tractor. Main frame, on which the cutterbar is situated, is supported by the springs (7). Swath
guides (5) are mounted on the main frame.
1
3
Fig. 3c. Parts of SaMASZ rear disc mower with tine conditioner
1 – 3-point linakge frame
2 – Hydraulic cylinder with support springs
3 – Intersecting axis gear
4 – Cutterbar
5 – Swath guides
3.3.
Standard equipment and spare parts
The mowers are sold with the following standard equipment:
warranty card,
operator's manual with spare parts list,
cutting knives: additional set,
PTO shaft with overrunning clutch,
spray paint (150 ml).
Optional extra equipment:
warning plate with combined lights and reflectors,
warning triangle.
Tab. 3. PTO shaft for rear disc mower
Model
Power
KM
KDT 180
KDT 220 ; KDT 260
KDT 300 ; KDT 340
KDT 341
KDT 220 S/SL/W
KDT 260 S/SL/W
Operator's manual
2
7
10
Lenght
Torque
ft. in
Nm
21
3'-3' 12''
270
35
2'12-4'22''
460
Rear disc mowers
(3) on the cutterbar (4). On the
intersecting axis gear
9
5
11
6 – Safety guard
7 – Springs
8 – Roller conditioner
9 – Chain gear
10 – PTO shaft
11 – Support legs
Symbol
7G2N086CE007096MA
7G4N091CE007096MA
- 6 -
KDT
8
4
6
11
Clutch
Producent
Overrunning
BONDIOLI
right
& PAVESSI