Table of Contents
Advertisement
Q40 Tape Library
5.6.3 Drive
From the Status > Drive screen you can see the configuration and status of each drive that is installed in
the library. Use Up and Down to select a drive from the drive list The drive list already provides the
powered status of the drives (On, Off).
The Status > Drive > Drive x screen provides the following status information:
•
Vendor
•
Personality
•
Firmware
•
Generation
•
Form Factor - HH, FH
•
Interface Type - Fibre Channel (FC), SAS
•
Manufacturer S/N
•
Powered - On, Off
•
WWNN
•
Temperature
•
Logical Library
•
Encryption
•
Cartridge - Barcode label, N/A if no cartridge loaded
•
Module Location
•
Cooling Fan Status - Active, Not Active
Fibre Channel Drive: Status for Port 0 and Port 1 (if present)
•
WWPN
•
Speed
•
Port Type
•
Port ID or Loop ID / ALPA
•
Interface
SAS Drive: Status for Port 0 and Port 1
•
WWPN
•
Interface
•
Speed
511026 Rev. 07-01-19
Installation and Operations Manual
72
Advertisement
Table of Contents
