5.6.2 Library
From the Status > Library screen you can see the library status information.
•
Library Status
•
Module Status for each single module in the stack (up to 7 modules can be possible)
The Status > Library > Library Status screen provides the following status information:
Library Information:
•
Vendor
•
Product ID
•
Serial Number
•
Base Firmware Revision
•
Expansion Firmware Revision
•
Robotic Hardware Revision
•
Robotic Firmware Revision
•
Barcode Reader Hardware Revision
•
Barcode Reader Firmware Revision
Library Status:
•
Library Status - e.g. Scanning, Moving, Idle
•
Total Power On Time - days/hours/minutes
•
Cartridge in Transport - source slot of current moving cartridge
•
Odometer
•
Robotic Location - Position in Stack
•
Shipping Lock - Locked/Unlocked
The Status > Library > Module screen provides the following status information:
•
Controller Revision - Base/Expansion controller
•
Power Supply Status
•
Lower Power Supply - Present/Not Present
•
Upper Power Supply - Present/Not Present
511026 Rev. 07-01-19
71