Qualstar Q40 Installation And Operation Manual page 110

Q40 Tape Library
6.19.2.1.1 Filtering by Barcode Label
To filter the list based on barcode label, enter characters in the filter box and then click Search.
1. CIick Filter On.
The search box is displayed.
2. Enter characters into the search box and then click Search.
The characters can be anywhere in the barcode label. The search characters are not case
sensitive. There are no wildcards.
To disable filtering, click Filter Off.
6.19.2.1.2 Listing Just Drives or Cartridges
To limit the list to tape drives, click Drives.
To limit the list to cartridges, click Cartridges.
To see all elements, click Partition or Slots.
6.19.2.1.3 Viewing Elements by Group
When the list is grouped, you can expand or contract the list for each group by clicking the triangle next to
the number in the first column. Grouping is enabled by default.
To disable grouping, click Group Off.
To enable grouping, click Group On.
6.19.2.2 Graphical View
The inventory graphical view displays each of the elements, such as slots and tape drives, with
information about the cartridge stored in the element. Unused slots, which are not available for move
operations, are greyed out and marked with a cross. Cartridges stored in these slots are displayed in the
same way as regular slots.
511026 Rev. 07-01-19
Installation and Operations Manual
110