Delta HES Series User Manual page 73

Chapter 4 Parameter Functions
41: Reserved
42: PG feedback error (PGF1)
43: PG feedback loss (PGF2)
44: PG feedback stall (PGF3)
45: PG feedback slip (PGF4)
46: Reserved
47: Reserved
48: Reserved
49: External fault input (EF)
50: Emergency stop (EF1)
51: Reserved
52: Password error (PcodE)
53: Reserved
54: Communication error (cE1)
55: Communication error (cE2)
56: Communication error (cE3)
57: Communication error (cE4)
58: Communication time out (cE10)
59: PU time out (cP10)
60: Braking transistor error (bF)
61~63: Reserved
64: Safety relay Error (SRY)
65: PG card information error (PGF5)
66: Over pressure (ovP)
67: Pressure feedback fault (PfbF)
As a fault occurs and the machine is forced shutting down, the event will be recorded. During
shutting down, the LvS is not recorded.
Low voltage level
VF
Control mode
Settings
This parameter is used to set the LV discrimination level.
PTC action selection
Control mode VF
Settings
Parameter 02-08 is used to define the operation mode of the drive after the PTC is activated.
PTC level
VF
Control mode
Settings
|HES Series
FOCPG FOCPM
230V Series: 160 – 220V
460V Series: 320 – 440V
Input Volt age
02-07
FOCPG FOCPM
0: Warn and keep operation
1: Warn and ramp to stop
2: Warn and coast to stop
FOCPG FOCPM
0.0~150.0%
0.0~150.0℃
30V(60V)
LV
4-30
○ ○
○
○
○
○
○ ○
○ ○
○
○
○ ○
○
○
○ ○
○
○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
Factory default: 180/360
Factory default: 0
Factory default: 50.0
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○