Delta HES Series User Manual page 63

Chapter 4 Parameter Functions
Pressure Command Rising/ Descending S1 curve
Control mode VF
Settings
Pressure Command Rising/ Descending S2 Curve
VF
Control mode
Settings
To increase the smoothness at start or stop while increasing or decreasing the percentage of
the pressure command. The longer the pressure reference time, the smoother it will be.
Pressure Command Rising/ Descending S1 Curve
Control mode VF
Settings
Flow Command Rising/.Descending S2 Curve
VF
Control mode
Settings
To increase the smoothness at start or stop while increasing or decreasing the percentage of
the flow command. The longer the flow reference time, the smoother it will be.
|HES Series
FOCPG FOCPM
0~1000ms
FOCPG FOCPM
0~1000ms
FOCPG FOCPM
0~1000ms
FOCPG FOCPM
0~1000ms
4-20
Factory default : 0
Factory default : 0
Factory default : 0
Factory default : 0