Table of Contents
Advertisement
1
Using the Probes
Quick-Action Button
By default, the probe's quick-action button turns the probe light on and off.
However, you can reassign this button to another function by using the
oscilloscope's Probe Configuration dialog box.
To reassign the probe button, click Utilities > Probe Configuration. In the Probe
Configuration dialog box, click the tab for the N2750A, N2751A, or N2752A probe
and then select the desired action in the Quick Action field.
Figure 12
20
NOTE
Requires a 9000 Series, 90000 Series, or 90000 Q/X-Series Infiniium
oscilloscope with software version 3.50 or above.
Probe Configuration Dialog Box
N2750/1/2A User's Guide
Advertisement
Table of Contents
