Table of Contents
Advertisement
6
Performance Verification
Figure 47
18 On the VNA, press [Trigger] > Single to trigger a single sweep. The display should
68
Close-Up Showing Tip Spacing and Position
g Position the probe's A tip on the center conductor as close to the edge of the
conductor as possible. Position the probe's B tip to the ground, as close to
the dielectric as possible.
look similar to
Figure 48
NOTE
If it looks noticeably different, the probe tip wires may not be making contact
under the pinchers.
on page 69.
N2750/1/2A User's Guide
Advertisement
Table of Contents
