Table of Contents
Advertisement
N2777A Solder-In Tip
The N2777A solder-in tip is intended to be soldered directly to your test device.
The tip includes integrated damping resistors. For best performance, use this tip in
differential mode with inputs A and B connected to test nodes.
The probes have the following bandwidths when using this tip:
When installing the tip on the probe, the tip's symmetrical design allows you to
orient the tip so that the blue lead can be located on the probe's A or B side.
Figure 6
N2750/1/2A User's Guide
N2752A Probe Amplifier: . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 GHz
N2751A Probe Amplifier: . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 GHz
N2750A Probe Amplifier: . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 GHz
NOTE
The color and position of the leads is not important except to allow you to
easily distinguish between the A and B leads.
Solder-In Tip
1
Using the Probes
13
Advertisement
Table of Contents
