10. Push paper feed unit U4 into the machine.
If you cannot fully insert unit U4, turn lever U4 counterclockwise while pushing
in the unit.
11. Reattach paper feed unit U4 with the two black screws.
12. Align the markers at (1) and (2), and then set the side plate.
1
13. Reattach the two black screws to the side plate.
14. Push Tray 4/Tray 6 back inside the machine.
15. Close the LCT front cover.
16. Reconnect the ground leakage circuit breaker for the machine and fixing heater.
17. Turn the machine's main power switch to ON, and then wait for the machine to
warm up.
18. Access the Adjustment Settings for Skilled Operators menu. (See p.18
"Accessing the Adjustment Settings for Skilled Operators".)
19. Reset the replaceable parts counter for the replaced feed roller. (See p.20
"Resetting the Replaceable Parts Counter".)
bzs130
2
bzs120
73
Copyright © 2010