4. Gently and firmly push the purple handle (2) into the machine until the drawer
can go no further and locks into place.
2
Important: Do not pinch the harnesses (1) on the frame when pushing the
development unit drawer into the machine.
5. Install the drawer stop knob (1), and then fasten it by turning it clockwise.
6.
Attach the inner cover, and then secure it by turning its three black screws
clockwise using the hex screwdriver.
7.
Reinstall the charger. (See p.26 "Reinstalling the Charger")
8.
Reattach the front top cover and close the toner hopper cover. (See p.22
"Reattaching the Front Top Cover".)
9.
Reconnect the ground leakage circuit breaker for the machine and fixing heater.
1
RPG032
1
RPG036
1
bzs134
31