Transfer Unit; Removing The Transfer Unit - Ricoh Pro C901S Replacement Manual

8. Transfer Unit

8.1 Removing the Transfer Unit

What You Need
• Accessory hex screwdriver provided with machine.
• Newspaper or other paper covering a nearby flat surface on which you can place
removed components.
WARNING
• To prevent electrical shock, turn off the main power switch and
disconnect the ground wire from the machine and fixing heater.
Replacement Message
Replacement of Transfer Unit is now necessary.
Replace Transfer Unit.
If this message appears, use the following procedure to replace the unit.
Preparation: Print out the counter list.
1. Press the [Counter] key on the control panel (see p.12 "Control Panel") and
print out the counter list.
2. Turn the machine off. (See p.14 "Turn the Machine off Before Beginning Any
Procedure!")
Procedure
1. Open the left and right front cover.
2. Rotate the lock lever (1) of the registration unit drawer counterclockwise, and
then pull the drawer toward you.
1
RPG042
50