Ricoh Pro C901S Replacement Manual page 41

13. Disconnect the developer bottle from the developer outlet contact, and then
remove it.
Important: Cover surrounding surfaces with paper. This will prevent spillage from
the developer bottle spoiling them.
14. Remove the seal (1) that is stuck to the developer bottle.
15. Attach the seal to the shutter (1) of the developer bottle, as shown.
Note: To prevent developer leaking during transport, cover the developer
bottle's opening.
Important: At this point, begin the procedure for adding the new developer. (See
p.42 "Adding New Developer")
1
1
bzs150
41
bzs155