Ricoh Pro C901S Replacement Manual page 49

8. Press [OK].
Wait a while. The message "The setting(s) will be applied. Please wait." should
disappear after about five minutes.
9. Reset the replaceable parts counter for the cleaning unit for intermediate
transfer belt. (See p.20 "Resetting the Replaceable Parts Counter".)
10. Open the left and right front covers.
11. Rotate the cleaning blade contact levers (1) counterclockwise.
12. Reattach the inner cover and then fasten the two black screws on the inner
cover of the cleaning unit for intermediate transfer belt using the hex
screwdriver. (See p.45 "Removing the Cleaning Unit for Intermediate Transfer
Belt".)
13. Close the left and right front covers.
1
1
bzs138
49