5. Drum Unit
5.1 Removing the Drum Unit
What You Need
• Accessory hex screwdriver provided with the machine.
• Newspaper or other paper covering a nearby flat surface on which you can place
removed components.
WARNING
• To prevent electrical shock, turn off the main power switch and
disconnect the ground wire from the machine and fixing heater.
Replacement Message
Replacement of Drum Unit is now necessary.
Replace Drum Unit.
If this message appears, use the following procedure to replace the unit.
Preparation: Print out the counter list.
1. Press the [Counter] key on the control panel (see p.12 "Control Panel") and
print out the counter list.
2. Turn the machine off. (See p.14 "Turn the Machine off Before Beginning Any
Procedure!")
33