Ricoh Pro C901S Replacement Manual page 53

4. Using the hex screwdriver, turn the black screws to lock the front (1) and rear
(2) locks.
5. Carefully the registration unit drawer into the machine until it can go no further
and locks into place.
6. Rotate the lock lever (1) of the registration unit drawer clockwise.
7. Reconnect the ground leakage circuit breaker for the machine and fixing heater.
8. Turn the machine's main power switch to ON, close the left and right front
covers, and then wait for the machine to warm up.
9. Access the Adjustment Settings for Skilled Operators menu. (See p.18
"Accessing the Adjustment Settings for Skilled Operators".)
10. Reset the replaceable parts counter for the transfer unit. (See p.20 "Resetting
the Replaceable Parts Counter".)
2
RPG068S
1
RPG043
53
1
RPG067S