Ricoh Pro C901S Replacement Manual page 64

5. Using the hex screwdriver, replace the five black screws.
6. Reconnect the ground leakage circuit breaker for the machine and fixing heater.
7. Turn the machine's main power switch to ON, and then wait for the machine to
warm up.
8. Access the Adjustment Settings for Skilled Operators menu. (See p.18
"Accessing the Adjustment Settings for Skilled Operators".)
9. Reset the replaceable parts counter for the replaced toner filter. (See p.20
"Resetting the Replaceable Parts Counter".)
bzs107
64