OVMS User Manual page 76

OVMS: Renault Twizy User Guide
Configuration
As RAM is very tight on the V2.x, there is no option to control the acceleration smoothing.
You still can configure the brake light on/off deceleration levels if the defaults don't fit for you, but
that needs to be done on the tuning profile level by „CFG BRAKELIGHT <level_on> <level_off>".
The SEVCON brakelight control has been disabled since a while, the command will not write to the
SEVCON but just use the profile parameters to store your prefs. Keep in mind the levels need to be
stored in every profile you use and changes will be lost if you don't save the profile.
You also need to supply precalculated level values to „CFG BRAKELIGHT" as follows:
level value = deceleration [m/s²] * 36, rounded to the next integer
•
Default levels are:
ON: 43
•
OFF: 26
•
= ~ 1.19 m/s²
= ~ 0.72 m/s²
76 / 77
2019/05/02 RT3.9.1