OVMS User Manual page 57

OVMS: Renault Twizy User Guide
Command
CFG GET [slot#]
CFG SET [slot#]
[base64data]
Encoding and decoding base64 profiles (cfgconv)
"CFG GET" and "CFG SET" can be used to quickly exchange complete profiles. They are meant
for backup/restore, sharing and offline editing. The command line utility "cfgconv" (see client
directory) can be used to create a base64 profile from a series of text commands and vice versa.
Decode base64 profile to text commands:
cfgconv base64data > profile.txt
Function
V3.7:
Get (download) a complete profile base64 encoded. A base64
encoded profile is a text string that contains all macro command
parameters and that can be copied & transmitted easily.
Use this to backup your profiles, send them to your friends or edit
them offline. See also "cfgconv" below.
slot# = 1..3: get EEPROM profile directly
...else: get working set
Note: you may use "0" to address the working set, but don't
confuse this with profile #0. Maybe better use "-" or "WS"
(translates to 0).
V3.7:
Set (upload) a complete profile from a base64 encoded string
(counterpart to CFG GET).
slot# = 1..3: set EEPROM profile directly, no SEVCON access
...else: set working set & try to apply changes to SEVCON
base64data = encoded profile from CFG GET or cfgconv
...omit/empty = RESET profile
CFG SET will check the profile consistency and report errors. If
you set an EEPROM profile, the parameter values will not be
checked until you actually load the profile.
Note: you may use "0" to address the working set, but don't
confuse this with profile #0. Maybe better use "-" or "WS"
(translates to 0).
57 / 77
2019/05/02 RT3.9.1