OVMS User Manual page 51

OVMS: Renault Twizy User Guide
Command
CFG TSMAP [DNB] [t1%
[@s1]] [t2%[@s2]] [t3%
[@s3]] [t4%[@s4]]
CFG TSMAP [DNB]
CFG TSMAP
Function
Change one or multiple torque scaling map(s) (power level per
speed lookup tables).
DNB: select the maps to change (may be any combination):
D = Drive, N = Neutral braking, B = Footbraking
t1%: level at 33 kph, 0..100, default D=100 N/B=100
t2%: level at 39 kph, 0..100, default D=100 N/B=80
t3%: level at 50 kph, 0..100, default D=100 N/B=50
t4%: level at 66 kph, 0..100, default D=100 N/B=20
Each of the four percentage level points can be extended by an
"@" char (no spaces!) followed by the speed coordinate of that
point in kph:
s1: speed for t1, 0..120, default 33 kph
s2: speed for t2, 0..120, default 39 kph
s3: speed for t3, 0..120, default 50 kph
s4: speed for t4, 0..120, default 66 kph
Points will not be sorted by speed, so take care to give them in
order.
If multiple maps shall be changed, the command will stop if it
encounters an error, the remaining maps will not be changed.
NOTE: this command will need to go pre-operational, so the
vehicle needs to be stopped.
Reset specified torque scaling maps to default.
NOTE: this command will need to go pre-operational, so the
vehicle needs to be stopped.
Reset all three torque scaling maps to default.
NOTE: this command will need to go pre-operational, so the
vehicle needs to be stopped.
51 / 77
2019/05/02 RT3.9.1