OVMS User Manual page 27

OVMS: Renault Twizy User Guide
"dist" values represent distances driven, unit is 1/10 m on speed sections and 1 m on level
•
sections
"hsum" values are totals of height changes in meters
•
Speed "cnt" are in 1/10 seconds, "sum" are 1/100 kph
•
Charge sums (coulomb counts) are in Ah
•
Drive & charge power log record format:
RT-PWR-Log,<timestamp>,0
,<OdometerKm>,<Latitude>,<Longitude>,<Altitude>
,<ChargeState>,<ParkTimeMin>
,<SOC>,<SOCMin>,<SOCMax>
,<PowerUseWh>,<PowerRecWh>,<DistanceDriven>
,<RangeEstimKm>,<RangeIdealKm>
,<BatteryVolt>,<BatteryVoltMin>,<BatteryVoltMax>
,<BatteryTemp>,<BatteryTempMin>,<BatteryTempMax>
,<MotorTemp>,<PEMTemp>,
,<TripLengthKm>,<TripSOCUsage>
,<TripAvgSpeedKph>,<TripAvgAccelKps>,<TripAvgDecelKps>
V3.6:
,<charge_used_ah>,<charge_recd_ah>,<batt_capacity_prc>
V3.7.2:
,<ChargerTemp>
ChargeState: 0=not charging, 1=charging, 2=top off, 4=done, 21=stopped charging
•
Charging power will be logged in PowerRecWh
•
V3.6: Charge used/recd (Ah) and battery capacity (%) added
•
V3.6: all Wh values now derived from real battery current & voltage (see above, to get Ah
•
from previous Wh data, divide by 64)
V3.7.2: temperature readings have been fixed based on new diagnostic information:
•
charger temperature is new (previously displayed as PEM temperature)
•
PEM (inverter) temperature is now correct (previously displayed as motor temperature)
•
motor temperature is now correct (previously not displayed)
•
battery temperature is unchanged, was correct in previous versions
•
Example:
RT-PWR-Log,2014-01-26 18:29:28,0,
13365.22,51.257704,7.160899,201,
4,113,
100.00,32.08,100.00,
27 / 77
2019/05/02 RT3.9.1