Connecting To Wlan Via The Wps-Function; Wps-Function; Connecting Wlan Automatically Via The Wps Function; Selecting The Wlan Manually And Conneting Via Wps - T+A HV Series User Manual

Connecting to WLAN via the WPS-function

WPS-function

Connecting WLAN
automatically via the WPS
function
Selecting the WLAN
manually and conneting via
WPS
60
The SDV 3100 HV supports WPS for WLAN setup. WPS (Wi-Fi Protected
Setup) an easy process for establishing a secure WLAN connection. WPS can
be used to connect the SDV 3100 HV with your router in a quick and
convenient way. For that usage most modern routers have implemented the
WPS function.

First activate the WPS-function of the Router or Repeater to which you
wish the SDV 3100 HV to be connected. For details please refer the
manual of the device in question.
 Start the WPS-Autoconnect function of the SDV 3100 HV within 2
minutes.

Use the  /  buttons to select the menu point "WPS-
Autoconnect", then confirm your choice with the  button.
 After the connection is established, the line "Status" shows the
connected WLAN network.
 Finally select the "Store and exit?" menu point and press the 
button to accept the settings.
If the WPS function connects the SDV 3100 HV to the wrong WLAN, the
preferred WLAN can be also selected manually and only the authentication
can be done by the WPS function. The procedure is described in the
following:
 First activate the WPS-function of the Router or Repeater to which you
wish the SDV 3100 HV to be connected. For details please refer the
manual of the device in question.

First select the menu point "Scan for WLANs", and activate it by
pressing the  button.
 A list of the WLANs found is displayed on the screen.

Use the  /  buttons to select the WLAN to which you wish
the SDV 3100 HV to be connected, and confirm your choice with the
 button
The window shown below will appear once the WLAN is selected:
 Select the "Login" menu point and press the  button to activate
it. Now select the setting „Auto (WPS)" and confirm it with the 
button.
 Now select the "Store and exit?" menu point and press the 
button.

After the connection is established, the line "Status" shows the
connected WLAN network.

Finally select the "Store and exit?" menu point and press the 
button to accept the settings.