D/A-Converter Settings Of The Sdv 3100 Hv; Calling Up And Operating The Menu - T+A HV Series User Manual

D/A-Converter settings of the SDV 3100 HV

A number of special settings are available for the SDV 3100 HV D/A converter; they are designed to fine-tune the
characteristics of your amplifier to suit your listening preferences.. This settings are described in detail in the
following chapter.
Calling up and operating the
menu
22
To call up the menu, press and hold the  button on the F3100.

To call up the menu on the front panel, touch the

the menu item "D/A configuration" with the SELECT knob and press it to
access the menu.
When you open the menu, the following Select points appear on the

screen:
Using the front-panel controls:
The SELECT knob is used to select any item within the menu system.

To change a selected menu item, press the SELECT knob to confirm your

choice, then adjust the value by rotating the knob.
After making the adjustment, press the SELECT knob again to adopt the

new setting.
You can interrupt the process at any time by touching the

this case any changes you have made are discarded.
Holding the SELECT knob pressed in takes you one level further down in

the menu system.

Touch the button again to quit the menu.

Using the remote control handset:
Use the  /  buttons to select an item in the menu.

If you wish to change a selected menu item, first press the

-button, and then use the  / -buttons to alter it.
After making the change, press the -button again to accept the

new setting.
You can press the -button at any time to interrupt the process; the

change is then abandoned.
Press the button again to leave the menu.



button and select

button; in