Notes On Energy Saving; General Information; Automatic Power Down Function - T+A A 200 User Manual

Notes on energy saving

General information

The A 200 satisfies the requirements of the latest directives concerning energy-saving measures (EuP
directive). The modern design of the mains power supply makes an important contribution to this.
The internal micro-processor constantly ensures that sub-assemblies which are not currently required
are automatically switched off. The micro-processor itself operates in stand-by mode at a relatively low
clock speed.
In stand-by mode the current drain of the A 200 is less than 0.5 Watt.
If you intend not to use the amplifier for a long period, it should be disconnected from the mains socket,
i.e. the mains plug should be withdrawn from the wall socket or switch off the main switch.

Automatic power down function

The device features an automatic power-down function. If the A 200 detects no operation or no music
signal approximately 30 minutes, it automatically switches to stand-by mode
In countries outside the EU, in which the EuP directive has no validity, the automatic power-down feature can
j
be disabled if necessary
See chapter „Playback".
33