Basic Settings Of The Sdv 3100 Hv; Calling Up And Operating The Menu; D/A Configuration - T+A HV Series User Manual

In the System Configuration menu general device settings are adjusted. This menu is described in detail in the
following chapter.
Calling up and operating the
menu

D/A configuration

menu item
18

Basic settings of the SDV 3100 HV

System Configuration menu
To call up the menu, briefly press the

-button on the remote control F3100.

When you open the menu, the following Select points appear on the

screen:
Using the front-panel controls:
The SELECT knob is used to select any item within the menu system.

To change a selected menu item, press the SELECT knob to confirm your

choice, then adjust the value by rotating the knob.
After making the adjustment, press the SELECT knob again to adopt the

new setting.
You can interrupt the process at any time by touching the

this case any changes you have made are discarded.
Holding the SELECT knob pressed in takes you one level further down in

the menu system.

Touch the

Using the remote control handset:
Use the  /  buttons to select an item in the menu.

If you wish to change a selected menu item, first press the

-button, and then use the  / -buttons to alter it.
After making the change, press the -button again to accept the

new setting.
You can press the -button at any time to interrupt the process; the

change is then abandoned.
Press the


This item opens the D/A Converter Settings menu. For details, refer to
chapter "D/A converter settings of the SDV 3100 HV" (p. 22).

button again to quit the menu.
button again to leave the menu.
-button on the front panel or the

button; in