T+A HV Series User Manual page 15

Screen symbols and their meaning
0 / 0
ABC or
123 or
abc

 The SDV 3100 HV provides different screen displays for the different sources
e.g. UPnP/DLNA and the radio.

Large-format display:
Enlarged display of the most important information, clearly legible even
from a distance

Detail display:
Small-text display showing a large number of additional information
points, e.g. bit-rate etc.
A long press on the
 button on the front panel is used to switch between the display
modes.
Making connection (Wait / Busy)
The rotating symbol indicates that the SDV 3100 HV is currently processing a
command, or is attempting to connect to a service. These processes may
take some time to complete depending on the speed of your network and the
load upon it.
During such periods the SDV 3100 HV may be muted, and may not respond to
the controls. Please wait until the symbol disappears, then try again.
Indicates a music track which can be played, or a playlist.
Indicates a folder which conceals further folders or lists.
Indicates that a source is being reproduced via a cable connection.
Indicates that a source is being reproduced via a radio connection.
Indicates that the SDV 3100 HV is reproducing a station or playing back a
music track.
Pause indicator
Buffer display (fullness indicator, memory display) and data rate indicator (if
available):
The higher the data rate, the better the quality of reproduction.
Display of the elapsed playback time.
This information is not available for all services.
Indicates that the  button can be used to switch to a higher menu or
select level.
Position indicator in select lists. The first number shows the current position
in the list, the second number the total number of list entries (length of list).
Indicates that the selected menu item or list point can be activated by
pressing the  button.
Display of the symbol input modes
Indicates the field strength of the radio signal.
If the  symbol appears while playing back from a digital input - the
SDV 3100 HV has switched over to its internal precision oscillator (local
oscillator). This eliminates jitter effects, but is only possible if the clock
quality of the connected signal is adequate.
button on the remote control handset or the

15