Switching Radio Text On And Off; Mono / Stereo; Dab - Radio; Selecting Dab Radio - T+A HV Series User Manual

Switching Radio Text on and
off

Mono / Stereo

(only FM – Radio)

DAB - Radio

Selecting DAB radio

Display
30
 The Radio text function can be switched on and off by long presses on the
 button on the remote control handset. Repeatedly if necessary.
You can toggle the radio of the SDV 3100 HV between stereo and mono
reception by a long press on the  button on the F3100. The reception
mode is shown on the screen by the following symbols:
If the station you wish to listen to is very weak or very distant, and can only
be picked up with severe background noise, you should always switch to
MONO mode as this reduces the unwanted hiss significantly.
 The Mono and Stereo symbols are only shown in the detailed screen display.
Select the source "DAB Radio" with the source selection button  on
the F3100 or by turning the SOURCE / VOLUME knob on the front panel of the
SDV 3100 HV.
 Depending on the frequency band (block), it may take up to two seconds to
switch stations when in DAB mode.
a) Displays the type of reception currently in use.
b) Hear the music type or style is displayed, e.g. Pop Music.
This information is only displayed if the transmitting station broadcasts it
as part of the RDS system. If you are listening to a station which does not
support the RDS system, or only supports it in part, these information
fields remain empty.
c) The frequency and / or the station name is displayed in enlarged form. If a
station name is displayed, its frequency is shown in area 'e'.
d) These lines display information which is broadcast by the station (e.g.
Radiotext).
e) Display of Stereo ''.
f) The field strength  and therefore the reception quality to be expected
from the set transmitting station can be assessed from the field strength.
g) Bit-rate of the broadcasting station when listening to DAB radio.
* The higher the bit-rate, the better the station's sound quality.
' ' (Mono) or '' (Stereo)