Speaker; Phones; Monitor Function; Balance - T+A PA 3100 HV User Manual

Menu item

Speaker

Phones

Monitor function

Balance


The following menu items are only displayed if the optional APM sound processor module is installed.

Tone Control

Tone (L) / (R)

This sub menu points only
appears, if "separate for L/R"
under the menu item "Bass /
Treble settings" is chosen. In
this case the settings for bass and
treble can be done separately for
each channel.

Treble

46
Adjustment range options:
Off / A / B / A+B
off / on
off / on
99L ... 0 ... 99R
off / on
- 6 ... 0 ... + 8
Explanation:
This menu item is used to switch the speaker
outputs on and off.

Using the remote control handset, the speaker
outputs can be switched directly by pressing
the  button (repeatedly if necessary).
If you have switched on the Bi-Wiring option in
System Configuration,
available are "off" and "A+B".
(see the chapter entitled "Basic settings of
the PA 3100 HV").
Switches the headphone output on and off.
Switches the Monitor
"RECORDER" input on or off.
If your recording device features a Tape
Monitor function, the recording can be checked
when the Monitor function is switched on.
This menu point is used to alter the balance in
level between the left and right channels, e.g.
to compensate
loudspeaker positioning. The balance can be
adjusted in increments of 1 dB; the screen
always displays the current value.
This menu point can be used to disable (by-
pass) the P 3100 HV' s tone controls.
To switch off the tone controls, select the "OFF"
setting. When the tone controls are switched
off, any adjustments you make to the following
menu points "BASS" and "TREBLE" have no
effect.
The purpose of this menu point is to call up the
configuration menu for tone control for the left /
right channel.
The sub menu points „TREBLE" and „BASS"
correspond to the menu items below.
This menu point is used to adjust the treble
settings.
the only settings
function for the
for non-symmetrical