Defining Position Variables - YASKAWA DX200 Operator's Manual

5.2

Defining Position Variables

② Click [Position Variable].
The [Position Variable] dialog box appears.
To create a job using position variables, the position variables must be defined in
NOTE
this window before saving the data.
④ Click type to select the frame.
*) Use [↓], [↑], [→] or[←] key to move the
cursor and press [Space] key or [F2] key.
⑥ Click [OK].
① Click [Settomgs].
③ Click [Robot].
⑤ Click and Edit the value.
*) Use [↓], [↑], [→] or[←] key to move the
cursor and press [Space] key or [F2] key.
HW1482392
97
5EDITING OTHER ITEMS