Adding An Item - YASKAWA DX200 Operator's Manual

3.10.2

Adding an Item

To call up the Detail Edit window, perform the same procedure as described in steps "1" to "3"
of section 3.10.1 "Changing an Item".
① Use the [↓], [↑], [→]
or [←] key to move the
cursor to the item to be
changed.
② Press the [Space]
key.
A selection list appears.
③ Use the [↓] or [↑]
key to make a
selection.
④ Press the
[Enter] key.
The added item appears in the [Detail Edit] window.
⑤ Move the cursor to the
numerical data when
the numerical value of
the item is to be
changed.
⑥ Press the [Space]
key.
HW1482392
55
3EDITING(Standard)