YASKAWA DX200 Operator's Manual page 3

• This manual explains the Job EditorDX200. Read this manual carefully
and be sure to understand its contents before operation.
• General items related to safety are listed in the Chapter 1: Safety of
Controller Instructions. To ensure correct and safe operation, carefully
read Controller Instructions before reading this manual.
• Some drawings in this manual are shown with the protective covers or
shields removed for clarity. Be sure all covers and shields are replaced
before operating this product.
• The drawings and photos in this manual are representative examples
and differences may exist between them and the delivered product.
• YASKAWA may modify this model without notice when necessary due to
product improvements, modifications, or changes in specifications. If
such modification is made, the manual number will also be revised.
• If your copy of the manual is damaged or lost, contact a YASKAWA
representative to order a new copy. The representatives are listed on
the back cover. Be sure to tell the representative the manual number
listed on the front cover.
• YASKAWA is not responsible for incidents arising from unauthorized
modification of its products. Unauthorized modification voids your
product's warranty.
• Software described in this manual is supplied against licensee only,
with permission to use or copy under the conditions stated in the
license. No part of this manual may be copied or reproduced in any
form without written consent of YASKAWA.
DANGER
CAUTION
3
HW1482392