Appendix; Frequently-Asked Questions; When The Driver Has Been Installed With Usb Type Key; Connected To A Personal Computer - YASKAWA DX200 Operator's Manual

Hide thumbs Also See for DX200:
Table of Contents

Advertisement

6APPENDIX

6 APPENDIX
6.1

Frequently-asked questions

6.1.1

When the driver has been installed with USB type key

connected to a personal computer

1. Under the state that the USB type key is attached to the personal computer, delete the
item registered as "USB Token" in Device Manager.
2. Uninstall the driver (Sentinel System Driver) with [Add/Remove Programs].
3. Install the driver with key detached from personal computer. With the procedure
above, the driver can be performed normally.
(For installation, refer to section 1.2 Hardware Lock Key")
6.1.2

When the previous version driver has been installed

after installing the driver

In this case, a problem may arise rarely. Therefore, uninstall the driver Sentinel System Driver
by [Add / Remove Programs].
(For installation, refer to section 1.2 "Hardware Lock Key" in the following section.
120

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents