Copying An Instruction; Copying One Line; Copying Multiple Lines - YASKAWA DX200 Operator's Manual

4.5

Copying an Instruction

4.5.1

Copying One Line

① Move the cursor to
the top of line to be
copied.
② Move the cursor
holding the [Shift] key
down to select the line.
③ Click [Copy].
Perform the same operation as described in section 4.6 "Pasting an Instruction".
It does not limit to copy instructions, but please caution if copy the move instruction
NOTE
or structured language.
4.5.2

Copying Multiple Lines

Perform the procedure described in section 4.4 "Selecting Multiple Lines" and then perform
the procedures as described in step 3 in section 4.5.1 "Copying an Instruction".
HW1482392
85
4EDITING (TEXT)