Table 1-1 Res-21Xr3 For X8Sax Motherboard Options; Table 1-2 Major Features Of The Res-21Xr3 - Themis RES-21XR3 Installation Manual

RES-21XR3 for X8SAX Installation Manual
Mother-
IPMI SATA
a
board
X8SAX —
a—SuperMicro Computer, Inc.
b—SAS support requires additional optional I/O card
c—The PCI-e x4 is in an x8 slot.
d—64-bit 133/100 MHz PCI-X
e—32-bit 33-Mhz PCI slots.
The RES-21XR3 for X8SAX is designed within a 2RU-high (3.5") form factor 17"
(43.2 cm) deep and 17.07" (43.4 cm) wide (which, with mounting brackets, fits a 19"-
wide rack). Major features of motherboards are listed in Table 1-2.
Feature
Processor (CPU)
Chipset
Memory
Expansion slots
Rear-Panel I/O
Peripheral Support
Operating temperature
b
Shock endurance
Dimensions
Rack-mount brackets
and slides
Dual power supplies
a—requires additional optional I/O card.
b—Specifications are dependent on the configurations as described in this manual
1-2
Table 1-1. RES-21XR3 for X8SAX Motherboard Options
Memory
SAS
Slots
b
Yes — 6
Table 1-2. Major Features of the RES-21XR3
One 1366-pin Intel quad-core 5500-Series or Quad/Six-Core 5600-Series
Xeon CPU @ up to 6.4 GT/s each
Intel X58 Express Chipset
ICH10R + PXH/V
Six 240-pin DIMMs supporting up to 24 GB (4GB DIMMs) of ECC DDR3
1333/1066/800 72-bit SDRAM
See Table 1-1 for details
See Table 1-4 on page 1-9 for details
Eight removable SAS
1 combination CD-RW/DVD-ROM slimline (IDE) drive
b
0° up to 65° C (32° up to 149°F)
35G @ 25-msec duration (3 axis)
3.5" (2RU) high, 17.07" (43.4 cm) wide (19"/48.3 cm with mounting brackets),
17" (43.2 cm) deep
Left and right rack-mount tabs are attached to the chassis
Left and right rack-mount slides are optional
750 watts each, auto-ranging (100–265 VAC)
Load-sharing N+1 redundant, hot-pluggable
(Optional)—Choice of 750-watt (48V) or 500-watt (28V) DC Power supply
Graphics Audio
PCI-e
— Yes
Details
a
or six SATA with two SAS
PCI-e, PCI-X, and PCI Slots
PCI-e PCI-e
x16 x8 x4
c
2 — 1
a
storage drives
PCI-X PCI
d e
2 1
Themis Computer