Table of Contents
Advertisement
ID3000 Series Installation & Commissioning Manual
WARNING High Voltage!
Take suitable precautions
to avoid electric shock.
EN54-2: 12.5.2
Maximum of 32
Sensors and/or MCPs
between isolators.
Magnetise the tip of your
screwdriver to help when
offering small screws to
holes in confined spaces.
2
Installation Guide
2.1 How to Use this Guide
This Installation Guide is intended to provide you with
simple guidelines on how to install an ID3000 Series fire
control panel or system, quickly and safely.
For each stage in the ID3000 Series panel installation
and commissioning procedures a brief description is given
of its purpose, complete with detail drawings, flow
diagrams and/or other graphics to make the instructions
easy to follow. Where required, procedures may be broken
down into one or more related flow diagrams, the number
being dependent upon the complexity of the defined task.
2.1.1 Related Documents
The guide does not describe any of the panel operating
or configuration stages, as these are covered by other
related manuals. For more information refer to:
ID3000 Series Operating Manual (ref. 997-505-000-X)
ID3000 Series Panel Configuration Manual
(ref. 997-506-000-X)
2.1.2 Warnings and Cautions
Where appropriate, this guide and the remainder of the
manual include advisory warnings and cautions to remind
you to consider safety at all times, especially when
following the procedures described in this manual.
You are alerted to any areas where high voltage [i.e. non-
Safety Extra-low Voltage (SELV)] is present, or where
there may be a risk of damage to static-sensitive devices
if the recommended procedures described in this manual
are not followed. An example of a high voltage warning
and anti-static caution is provided to the left of this
paragraph.
The ID3000 Series control panel has many powerful built-
in features which, if used inappropriately, may contravene
the requirements of EN54. Where there is a possibility
of such an occurence, a suitable warning is given with
brief details of the EN54 requirement. A typical EN54
non-compliance warning is illustrated at left.
2.1.3 Tips
'Handy tips' are included, where appropriate, to assist
you in following quick and safe procedures for fire
detection system installation and integration.
Look for the 'TIP!' icon and supporting text, typically
illustrated at left.
3
997-274-000-6, Issue 6
September 2009
Hide quick links:
Advertisement
Table of Contents
