Table of Contents
Advertisement
SR107 Plus Series
2. System Components Installation and Removal
SR107 Plus supports up to 8 x 3.5" hot-swap SAS/SATA HDD or 8 x 3.5" Internal SAS/SATA HDD. Support for different storage and
peripheral options will vary depending on the system model and/or available accessory options installed.
2-1 Front Bezel Installation
Figure 9
Bezel installation
1. Align the bottom bezel latch with the metal frame of the chassis, and lean the piece toward the chassis.
2. With the bezel door open, slide the mounting lock right on the top of the bezel and push down the bezel to lock into place.
3. Close the bezel door.
Figure 10 Bezel removal
1. Open the bezel door.
2. Slide right the mounting lock without releasing.
3. Detach the bezel starting from the top to the bottom of the bezel until it is fully detached.
15
System Components Installation and Removal
│
Advertisement
Table of Contents
