Internal Connectors - Aaeon IMBM-H61A Manual

NOTE: Refer to the audio configuration table below for the function of the
audio ports in the 2, 4, 6, or 8-channel configuration.
Audio 2, 4, 6, 8-channel configuration
Port
Light Blue (Rear
panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
8. USB 2.0 ports. These two 4-pin Universal Serial Bus (USB) ports are
available for connecting USB 2.0/1.1 devices.
9. DVI-I port. This port is for any DVI-I compatible device and are HDCP
compliant, allowing playback of HD DVD, Blu-Ray and other protected
content.
10. PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.
2.7.2

Internal connectors

1. ATX power connectors (24-pin EATXPWR, 4-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs
are designed to fit these connectors in only one orientation. Find the proper
orientation and push down firmly until the connectors completely fit.
IMBM-H61A
IMBM-H61A ATX power connectors
IMPORTANT:
•
•
•
2-16
2-channel 4-channel
Line In Rear Speaker Out Rear Speaker Out Rear Speaker Out
Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Mic In
-
EATX12V
GND
GND
PIN 1
For a fully configured system, we recommend that you use a power supply
unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)
and provides a minimum power of 350 W.
DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the
system will not boot up.
We recommend that you use a PSU with higher power output when
configuring a system with more power-consuming devices. The system
may become unstable or may not boot up if the power is inadequate.
6-channel
Mic In Bass/Center
-
EATXPWR
+3 Volts
+12V DC
+12 Volts
+12V DC
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
PIN 1
8-channel
Bass/Center
- Side Speaker Out
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts
IMBM-H61A