Table of Contents
Advertisement
2.
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
IMBM-H61A
IMBM-H61A Fan connectors
CAUTION:
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
connectors!
NOTES:
•
The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan
power.
•
Only the 4-pin CPU fan and 4-pin chassis fan support the Q-Fan feature.
3.
LPT connector (26-1 pin LPT)
The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT is
standardized as IEEE 1284, which is the parallel port interface on IBM PC-compatible
computers.
IMBM-H61A
IMBM-H61A Parallel port connector
Chapter 2: Motherboard information
CPU_FAN
CHA_FAN
Do not forget to connect the fan cables to the fan connectors.
LPT
2-17
Advertisement
Table of Contents
